Wayne State University

 
Add An Event

Main Events Calendar

January 22, 2013 | 1:30pm - 2:45pm
Category: Seminar
Location: ISE Conference Room
Cost: Free

Sara Behdad
Industrial & Systems Engineering Faculty Candidate
Doctoral Candidate, University of Illinois at Urbana-Champaign

 

Abstract
Environmental protection legislation, consumer interest in “green” products, and a trend toward corporate responsibility have resulted in increased interest in product take-back. In addition, many products reach the end of their first lifecycle with components or subassemblies that still contain a significant portion of the value added by the original manufacturing process. This can create a considerable economic incentive for developing product take-back systems. However, there are several impediments to cost-effective take-back. Disassembly operations are one of the significant cost drivers in end-of-life (EOL) decision making. Another impediment is the variability in the amount, quality and timing of return flows and uncertainty in the remanufacturing operations such as disassembly time. Unlike the original manufacturing process, the feedstock to take-back operations varies significantly, as many different models, ages and conditions are returned to the remanufacturing companies.

There are many issues to consider. Is it necessary or desirable to disassemble the product down to individual components? How can the disassembly processes be made more efficient? What EOL decisions (reuse, recycle, disposal, etc) should be made for each resulting component or subassembly? Which upgrade level maximizes the market value where the product quality may vary during time?

This talk discusses several decision analysis and optimization methods that can be applied to answer the above mentioned questions while considering the uncertainties in the product recovery activities. The result of applying these methods is to make product recovery operations profitable. In addition, involving in product recovery often generates some design insights regarding EOL products such as the ease of unfastening assemblies, the probability of no-damage during disassembly, and relative durability of their components. These insights can result in design modifications that facilitate EOL product disassembly, management of product recovery and reduce the amount of non-recyclable residual.

Biography
Sara Behdad is a PhD candidate in the Industrial and Enterprise Systems Engineering (ISE) department with specialty in Energy and Sustainability Engineering at the University of Illinois at Urbana-Champaign. Prior to joining University of Illinois, she received her B.S. and M.S. degrees in Industrial Engineering from the Tehran Polytechnic University, Tehran, in 2003 and 2006. Currently, she is a member of the Decision Systems Laboratory where she has been involved in several projects funded by NSF Engineering Design Division. The focus of her research is on developing mathematical models to tackle the difficult problem of making product take-back systems profitable. Sustainable Design Optimization, Closed-loop Supply Chain, Disassembly Sequence Planning, Green Manufacturing and Products End of Life Recovery Management are some of her research interests.

 

For more information about this event, please contact Ratna Babu Chinnam at 313-577-4846.